Always safe

PNI Safe House Dual Gas 250 ensures increased safety and comfort in the home or any space where there is a possibility of carbon monoxide or gas losses.

Designed with two semiconductor sensors, one for CO and one for the other detected gases, PNI Safe House Dual Gas 250 is the ideal solution from all points of view: durability, versatility, high tolerance to extreme environmental conditions and corrosive environments.

Types of gas detected

PNI Safe House Dual Gas 250 has the ability to detect:

- carbon monoxide (CO),

- natural gas (methane, propane, butane, ethane)

- gaseous hydrocarbons (propylene, butylene).

Attention, the gas sensor does not detect smoke, fire or gases from other categories than those mentioned above.

Carbon monoxide (CO) is an odorless, colorless and tasteless gas, completely undetectable to the human senses and very toxic.

Carbon monoxide results from the incomplete combustion, in an oxygen-poor place, of fuels such as wood, coal, oil, kerosene, propane, natural gas, etc.

Potential sources of CO can be: wood fuel stoves and fireplaces, gas stoves and boilers, oil or coal stoves, closed garages, etc.

Sound and light warning

With the help of the PNI Safe House Dual Gas 250 kit, you benefit from multiple warnings: both sound over 85dB and light through the LEDs on the front

These indicate, in addition to the alarm status, other functions of the device.

Full package

Benefit from the advantage of purchasing a complete package for the safe detection and interruption of the gas supply of a house. The package contains a gas sensor and a solenoid valve. Power and connection cables are included.

Product identification

Producer PNI

Product code PNI-SH250

Gas sensor features

Energy consumption maximum 3W

Usage conditions indoor only, humidity ≤ 95%

Supply voltage 230

Output voltage for the solenoid valve 9-12V LEL (Lower Explosive Limit) 7%

Dimensions / Weight Sensor:

72 X 33 X 123 mm / 200 g cable length to solenoid valve: 90 cm 230V

power cable length: 140 cm

solenoid valve: 65 x 45 x 105 mm / 380 g

cable length to sensor: 30 cm

Sensor priming time 180 sec.

Gas solenoid valve characteristics

Closing mode Current or manual pulse

Closing voltage DC 9 ~ 12 V (Pulse)

Connection 3/4 "inner thread

Maximum pressure 100 kPa

Operating temperature -10ºC ~ + 60ºC