Easily solve the problem of unstable voltage in your home

The single-phase voltage stabilizer with PNI SVM2000VA servomotor has been designed to keep the output voltage as stable as possible. When the mains voltage fluctuates, the stabilizer will automatically adjust the voltage as close as possible to the preset value.

Servomotor voltage stabilizers have high capacity, high efficiency, no wave distortion, automatic voltage adjustment, long service life and performance.

Servomotor voltage stabilizers have a wide range of applications. Depending on their capacity, they can connect: electromechanical equipment, industrial equipment, air conditioners, televisions, appliances, power tools, refrigerators and, in general, electronics that need stable voltage.

Principle of operation

When the unit measuring the input voltage detects a variation outside the preset range, it will send a signal to the control unit which will activate the servomotor. The secondary voltage transformer will change the polarity and magnitude of the compensation voltage and will control the output voltage within the preset range.

Copper Coil: The coil is the basic component of the voltage stabilizer. The single-phase voltage stabilizer with PNI SVM2000VA servomotor uses high quality pure copper. Thus, the coil has a longer service life and a higher efficiency.

3 connections - 1 input - 2 output

The 3 strip connections divided into one input and two outputs on the rear panel have undergone several connection tests to ensure that your appliances can be used safely.

The maximum load supported by the PNI SVM2000VA voltage stabilizer is

1600W 7.2A . The 1600W 7A capacity of the stabilizer allows the connection of household appliances, including TVs, printers, microwave ovens, fans and more.

Protection functions

The vents on both sides effectively disperse the heat generated in the conversion process. If there is an overload or short circuit, the built-in circuit breaker will cut off the power to protect your devices.

Other protections: start delay, mechanical error, overcurrent, short circuit, overtemperature.

Characteristics

Capacity: 1600W / 2000VA

Output voltage: 230

Frequency of entry: 50/60 Hz

Rated input voltage: 170Vac-260Vac

Overheating protection: Yes

Short circuit protection: Yes

Overload protection: Yes

Working temperature: -26°C ~ +80°C

Moisture: ≤ 90%

Size: 235 X 260 X 180 mm

Overvoltage protection: Yes

Low voltage protection: Yes

Waveform: sine