Remote control

With a wide range of applications, the PNI CA500LR can control garage doors, access doors, elevators, elevators, electromagnetic yales and more. The device includes a transmitter (remote control) and a receiver with 2 relays independent of each other.

Operating modes

By positioning the jumper on the motherboard, several modes of operation of the two relays can be programmed:

1. manual mode (by pressing the button on the remote control, the corresponding relay will close and open);

2. automatic mode (after releasing the button on the remote control, the corresponding relay returns to the initial stage);

3. dual mode (one relay closes and the other relay opens).

Maximum number of remote controls

The PNI CA500LR remote control relay can wind up to 18 remote controls.

Learning a new remote requires you to briefly press the learn button. The LED lights up. Press the A button on the remote control. The red LED flashes 3 times and then stays on to confirm the learning of the A button to control the first relay. The red LED stays on. Press the B button on the remote control. The red LED flashes 3 times and then goes out to confirm learning. Repeat the procedure to learn additional remotes.

Characteristics

Feeding 12V

Order relay 2 pcs

Channels 2

Sensitivity -105 dB

Consumption ~ 10mA

Remote 1 pc

Remote control batteries Alkaline type 23A 12V (included)

Frequency 433MHz

Color White

Size 49 x 40 x 16 mm

Operating temperature -26 ° C ~ + 60 ° C

The package contains

Relay Yes

Remote Yes

User manual Yes