Voltage stabilizer with PNI relay AVR M800VA, 2.2A, 480W, 800VA
No voltage fluctuations
The PNR AV8 M800VA 480W Relay Voltage Stabilizer has been designed to keep the output voltage as stable as possible. When the mains voltage fluctuates, the PNI AVR M800VA will automatically adjust the voltage to normal.
Depending on their capacity, PNI stabilizers have a wide range of applications: electronic appliances, home appliances, air conditioners, power tools, refrigerators and in general, electronics that need stable voltage.
How does it work?
When the unit that measures the input voltage detects a variation outside the preset range, it will send a signal to the control unit. The secondary voltage transformer will change the polarity and magnitude of the compensation voltage and will control the output voltage within the preset range.
Copper coil is the basic component of the voltage stabilizer. Voltage stabilizer with relay PNI AVR M800VA 480W uses high quality pure copper. Thus, the coil has a longer service life and a higher efficiency.
Maximum load supported
The maximum load supported by the PNI AVR M800VA voltage stabilizer is 480W 2.2A. The 480W 2.2A capacity of the stabilizer allows you to connect household appliances, including TVs, printers, microwaves, fans and more.
Caution: Do not connect consumers with loads that exceed the power of the stabilizer. For example, motor / compressor electronics can start up to 2-6 times the declared power. Choose the stabilizer, taking this into account.
In the rated voltage range ± 25% 50 / 60Hz, the PNI stabilizer provides 100% output power. Outside this range, the output power should be according to the adjacent diagram.
time-delay - 6 or 180 seconds;
automatic overvoltage and undervoltage protection (180V - 250V);
overload / overtemperature protection;
automatic adaptation to the input frequency (50/60 Hz).